D/builds-x survey installations PARTNER S-UKB.60, GAZ-UKB.60 , etc .

S-UKB.60
The installation for shock-rope and rotary drilling on a crawler has a power of 50-60 hp (depending on the selected engine option). This model provides 2900 kg of downhole pressure and 3900 kg of lifting pressure. Lifting the mast greatly simplifies the hydraulic cylinder. The installation is equipped with hydraulic outriggers.

S-UKB.60. Technical description.

GAZ-UKB.60
Installation for shock-rope and rotary drilling with a 50 hp engine (60 hp with a Lombardini engine). It is supplied on the basis of the GAZ chassis. The maximum torque is 2000 N*m, but can be optionally increased to 4000 N*m.

GAZ-UKB.60. Technical description.

URB-74
The installation for shock-rope and rotational exploration drilling URB-74 is capable of creating geophysical and structural wells up to 300 m deep. In addition, the model is equipped with a folding movable rotator. The high load capacity of the installation – 4500 kgf – is provided by a hydraulic jack with a multi-blade system.

URB-74. Technical description.

T-UKB.60
Trailer installation for shock-rope and exploration drilling based on a passenger trailer with a Lombardini engine, the maximum power of which is 51 hp. The maximum torque is 2000 Nm. The depth of drilling with flushing is 250 m.

T-UKB.60. Technical description.

URB-74 mini
The installation with hydraulic drive is assembled on the basis of the chassis of the GAZ car. Its maximum drilling diameter with augers is 350 mm. The drilling depth of wells is up to 350 m. And the maximum torque on the drilling tool in parallel mode is 3000-6000 Nm.

URB-74mini. Technical description.

URB-74ST
The maximum diameter of auger drilling is 350 mm. The drilling depth of wells is up to 350 m. The maximum torque in parallel mode is 3000-6000 Nm. The installation is supplemented with a set for static sensing.

URB-74ST. Technical description.

TL-UKB.60
Trailer installation on a two-axle chassis. The model has a diesel engine with a capacity of 60 hp, which meets international environmental standards. The drilling depth is 250 m. The maximum torque is 2000 Nm.

TL-UKB.60. Technical description.

PBU-74
This installation is equipped with a reinforced mast and a 4000 Nm rotator for operation in an appropriate way. PBU-74 also has a sliding rotator. In addition, the model is equipped with a hydraulic winch with a free discharge of 2500 kg for shock-rope drilling.

PBU-74. Technical description.

SBU-60 XL
A small-sized drilling rig with a 60 hp diesel engine on a self-propelled tracked base. The depth of drilling with flushing is 250 meters. The maximum initial diameter of the chisel is 300 mm. The maximum torque is 1450 Nm.

SBU-60XL. Technical description.

URB-74 UDM
The installation is capable of creating geophysical and structural wells up to 300 m deep. The installation provides for a reinforced mast, as well as a folding rotator and a hydraulic winch with a free discharge with a load capacity of 2500 kg for impact rope drilling.

URB-74 UDM. Technical description.

US-60
Drilling shed with a diesel engine with a capacity of 60 hp. Drilling depth with flushing is 200 meters. The maximum initial diameter of the chisel is 300 mm. The maximum torque is 1450 Nm.

US-60. Technical description.

URB-74 mini MTLB
This installation works on the MT-LB chassis. It has a hydraulic type of feed and rotation drive of the drilling tool. The depth of drilling with a screw is 30 m. The depth of drilling with flushing is 350 m.

URB-74 mini MTLB. Technical description.

URB-74TT
The model is assembled on the basis of a skidding tractor. The conditional depth of drilling wells with augers with a diameter of 30 m. The installation can drill the largest well with a flushing bit – up to 300 m.

URB-74TT. Technical description.

SBU-80L
A small-sized drilling rig with an 80 hp engine on a self-propelled tracked base. The depth of drilling with flushing is 200 meters. The maximum initial diameter of the chisel is 300 mm. The maximum torque is 1500 Nm.

SBU-80L. Technical description.

RBU-S15
The installation is designed for drilling geophysical and structural exploration wells, exploration of deposits of solid minerals, building materials and groundwater, engineering and geological surveys, installation of water intake and other wells. Drilling is carried out in a rotational way with flushing or purging of the well or augers.

RBU-S15. Technical description.

Price list